Skip to product information
1 of 10

Dask3D

E33 Alicia Mask lifesize Wearable Cosplay - Kit or Painted

E33 Alicia Mask lifesize Wearable Cosplay - Kit or Painted

Regular price €161,00 EUR
Regular price Sale price €161,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

💶 Prices are charged in EUR — USD prices shown are approximate.

Style

Product code: E33-ALICIA-KIT

Quantity

Clair Obscur: Expedition 33 introduced Alicia as one of its most compelling characters — a warrior navigating a world where the Paintress writes numbers on monuments and the entire population faces annual extinction. Alicia's mask carries both her identity and her defiance, a piece of equipment that defines her presence in the expedition's desperate journey. This lifesize wearable mask recreates her distinctive look from the acclaimed RPG in full surface detail.

Highlights

  • ✅ Lifesize wearable scale — all armor pieces for a full cosplay build
  • ✅ Choose your option: 3D printed DIY kit (ready to sand, fill, and paint) OR fully assembled and hand-painted
  • ✅ Durable PLA build with custom weathering and crisp, screen-accurate detailing
  • ✅ Individually handmade — slight natural variations make every piece unique

What's in the box

DIY kit: All printed parts, pre-fit and ready for finishing. You sand, fill, prime, and paint to your taste — full creative control, lower price.

Assembled & painted: The complete armor set, fully painted, weathered, and ready to wear or display. Nothing else needed.

Fan-made replica, not officially licensed. Intended for display, cosplay, and collectors.

🚚 Shipping
• Free worldwide shipping on orders over €35, sent from Greece
• Made to order — allow 4–6 weeks production
• Delivery: 10–15 days after dispatch

✉️ Custom orders welcome — message me to bring any prop to life.

Product safety & manufacturer

Every DASK3D piece is 3D printed, finished and hand-painted by me in my workshop in Greece. Below are the manufacturer details and safety information for everything in the shop, as required by the EU General Product Safety Regulation (EU) 2023/988.

Manufacturer

Dask3D (Fotis Daskalakis)
Fleming 24, 153 51 Pallini, Greece
Email: dask3d@gmail.com
Website: dask3d.com

Made in Greece (EU). Because I make the products myself inside the EU, there is no separate EU responsible person.

Product identification

Each product page shows the product name, photos and a product code (SKU) for the option you choose, for example DS-RIGHELM-KIT. The same code is on your order confirmation. Please quote it if you contact me about a product.

Safety information

  • Collectible for adults (18+), not a toy. These are display and cosplay replicas. Keep them out of reach of children: some pieces contain small parts that could be a choking hazard.
  • Helmets and armour are costume pieces only. They give no protection against impacts or falls and are not protective equipment. They limit vision and airflow: do not wear them while driving, cycling, on stairs or near traffic, and take them off if you feel too warm or short of breath.
  • Weapon props are non-functional replicas. They have no firing mechanism and no sharpened blade. Carry them in public only where local rules and event rules allow.
  • Heat. Printed plastic and wax can soften and deform above about 50 °C. Keep pieces away from heaters, open flames, and hot cars or direct summer sun.
  • Not for food, drink or consumption. No product is meant to hold food or drink or to be eaten, including goblets, bottles and similar pieces. They are for display only.
  • DIY kits are raw printed parts. Edges and support marks can be sharp. Wear gloves, eye protection and a dust mask when sanding, and use fillers, glues and paints as their makers direct, in a well-ventilated area.
  • Light-up pieces run on low-voltage USB or batteries, never mains power. Use a standard USB power adapter or the battery type stated in the listing. Keep batteries and button cells away from children, remove batteries before long storage, and switch the lights off when the piece is unattended. Do not open or modify the wiring.
  • Care. Dust with a soft dry cloth. Do not use solvents or put pieces in water.

Reporting a safety issue

If you notice anything unsafe about a product, stop using it and email me at dask3d@gmail.com with your order number and a photo. I reply to every message.

Dask3D

View full details