Dask3D
Star Wars Phase 2 ARC Trooper Helmet lifesize Wearable Cosplay - Kit or Painted
Star Wars Phase 2 ARC Trooper Helmet lifesize Wearable Cosplay - Kit or Painted
💶 Prices are charged in EUR — USD prices shown are approximate.
Product code: SW-P2ARC-KIT
Couldn't load pickup availability
ARC troopers, Advanced Recon Commandos, are the Republic's elite clone soldiers, sent on missions regular troopers couldn't handle. Their Phase 2 helmet adds the rangefinder and markings that mark out veterans like Fives and Echo. This lifesize wearable replica recreates the Phase 2 ARC Trooper helmet at full scale.
Highlights
- ✅ Lifesize wearable scale — fits head circumferences up to 24" (61cm) by default
- ✅ Painted version includes a fitted visor and comfort padding (the kit is printed parts only)
- ✅ Choose your option: 3D printed DIY kit (ready to sand, fill, and paint) OR fully assembled and hand-painted
- ✅ Durable PLA build with custom weathering and crisp, screen-accurate detailing
- ✅ Individually handmade — slight natural variations make every piece unique
What's in the box
DIY kit: All printed parts, pre-fit and ready for finishing. You sand, fill, prime, and paint to your taste — full creative control, lower price.
Assembled & painted: The complete helmet, fully painted, weathered, and ready to wear or display. Nothing else needed.
Dimensions
Fits head circumference up to 24" / 61cm (standard adult size)
Not sure it will fit? See my Helmet Sizing Guide. Kit or painted? See Kit vs Painted.
Fan-made replica, not officially licensed. Intended for display, cosplay, and collectors.
🚚 Shipping
• Free worldwide shipping on orders over €35, sent from Greece
• Made to order — allow 4–6 weeks production
• Delivery: 10–15 days after dispatch
✉️ Custom orders welcome — message me to bring any prop to life.
Product safety & manufacturer
Product safety & manufacturer
Every DASK3D piece is 3D printed, finished and hand-painted by me in my workshop in Greece. Below are the manufacturer details and safety information for everything in the shop, as required by the EU General Product Safety Regulation (EU) 2023/988.
Manufacturer
Dask3D (Fotis Daskalakis)
Fleming 24, 153 51 Pallini, Greece
Email: dask3d@gmail.com
Website: dask3d.com
Made in Greece (EU). Because I make the products myself inside the EU, there is no separate EU responsible person.
Product identification
Each product page shows the product name, photos and a product code (SKU) for the option you choose, for example DS-RIGHELM-KIT. The same code is on your order confirmation. Please quote it if you contact me about a product.
Safety information
- Collectible for adults (18+), not a toy. These are display and cosplay replicas. Keep them out of reach of children: some pieces contain small parts that could be a choking hazard.
- Helmets and armour are costume pieces only. They give no protection against impacts or falls and are not protective equipment. They limit vision and airflow: do not wear them while driving, cycling, on stairs or near traffic, and take them off if you feel too warm or short of breath.
- Weapon props are non-functional replicas. They have no firing mechanism and no sharpened blade. Carry them in public only where local rules and event rules allow.
- Heat. Printed plastic and wax can soften and deform above about 50 °C. Keep pieces away from heaters, open flames, and hot cars or direct summer sun.
- Not for food, drink or consumption. No product is meant to hold food or drink or to be eaten, including goblets, bottles and similar pieces. They are for display only.
- DIY kits are raw printed parts. Edges and support marks can be sharp. Wear gloves, eye protection and a dust mask when sanding, and use fillers, glues and paints as their makers direct, in a well-ventilated area.
- Light-up pieces run on low-voltage USB or batteries, never mains power. Use a standard USB power adapter or the battery type stated in the listing. Keep batteries and button cells away from children, remove batteries before long storage, and switch the lights off when the piece is unattended. Do not open or modify the wiring.
- Care. Dust with a soft dry cloth. Do not use solvents or put pieces in water.
Reporting a safety issue
If you notice anything unsafe about a product, stop using it and email me at dask3d@gmail.com with your order number and a photo. I reply to every message.
Dask3D
Share
